We are planning to enter rental business by having a business association with well-known and internationally renowned companies in Indian subcontinent markets. We shall provide the equipment solution required to minimize downtime, increase productivity and get the job done safely keeping the highest standard of servicing and delivery of equipment at competitive rates.


A mud pump is a reciprocating piston/plunger device designed to circulate drilling fluid under high pressure (up to 7,500 psi (52,000 kPa) ) down the drill string and back up the annulus. A mud pump is a large reciprocating pump used to circulate the mud (drilling fluid) on a drilling rig.


A top drive is a mechanical device on a drilling rig that provides clockwise torque to the drill string to drill a borehole. It is an alternative to the rotary table and Kelly Drive.


A traveling block is the freely moving section of a block and tackle that contains a set of pulleys or sheaves through which the drill line (wire rope) is threaded or reeved and is opposite (and under) the crown block (the stationary section). The combination of the traveling block, crown block and wire rope drill line offer the ability to lift weights in the hundreds of thousands of pounds. On larger drilling rigs, when raising and lowering the derrick continues, line tensions over a million pounds are not unusual.


It is a large, specialized valve or similar mechanical device, used to seal, control and monitor oil and gas wells to prevent blowout, the uncontrolled release of crude oil and/or natural gas from a well. They are usually installed redundantly in stacks.


Drill pipe, is hollow, thin-walled, steel or aluminium alloy piping that is used in drilling rigs. It is hollow to allow drilling fluid to be pumped down the hole through the bit and back up the annulus. It comes in a variety of sizes, strengths, and wall thicknesses, but is typically 27 to 32 feet in length.


Fishing refers to the recovery of drill string left in the wellbore. Numerous situations can occur that require fishing: Items dropped into the hole from the rig floor. Failure of surface equipment, especially pumps, which allows the hole to cave in and stick the drill string.


Tubulars are the steel pipe that is used to drill the well, case the wellbore, and support to flow the reservoir fluids. They come in many varieties and are engineered for high strength and rigidity.

0 +
No. of Wells
0 +
No. of Crews

What can we help you overcome?

We help companies stay ahead in a rapidly changing world.